In Progress Archives

Molten Salt Nuclear Graphite Qualification Plan

Natura will partner with Oak Ridge National Laboratory (ORNL) to develop a graphite qualification plan and identify performance characteristics and development plans to design, approve, and perform graphite irradiations with fuel-bearing salts. The plan will look at utilizing the High Flux Isotope Reactor (HFIR) at ORNL which would allow for rapid neutron irradiation of graphite (7-10 dpa per year) in a future irradiation test outside of the voucher scope. The project will also include the development of fuel-bearing, molten salt irradiation capsules to support the future irradiation test.

Radiation Test of Smart Electric Cable for Nuclear Power Plants

AiMiLi will partner with Pacific Northwest National Laboratory (PNNL) to access the Accelerated and Real-time Experimental Nodal Assessment (ARENA) Cable Test Bed and High Exposure Facility (HEF) gamma irradiation capabilities. These facilities can simulate adverse power plant environments in a testing environment.

Reference Data for Determination of Carbon and Oxygen Content in TRISO Fuel Kernels

Standard Nuclear is developing alternative methods to assess the carbon and oxygen content in the fuel kernel. They will partner with Oak Ridge National Laboratory (ORNL) to perform LECO testing in the Low Activation Materials Development and Analysis (LAMDA) laboratory to help baseline and calibrate the method. By developing an alternative method for assessing carbon and oxygen content in TRISO fuel kernels, this project will reduce the cost and inefficiencies associated with current destructive testing methods.

Candidate Materials Tribology Testing for Sodium Bearing in Sodium Fast Reactors

Hayward Tyler will partner with Argonne National Laboratory (ANL) to perform tribological (wear) testing of several candidate materials that offer superior wear resistance while reducing the radiological hazards of cobalt bearing materials. They also plan to test the bearings to ascertain surface wear mechanisms using the Mechanisms Engineering Test Loop (METL) facility. The benefits of this project will be to identify alternative bearing materials to decrease costs and enhance safety.

Heat Exchanger Evaluation, NuCube Energy

NuCube will partner with Idaho National Laboratory (INL) to receive assistance in computational analysis of the heat exchanger design. INL has developed a code to optimize high temperature heat exchangers for both installation and operating costs and has validated that code for conventional shell and tube heat exchangers. This analysis will allow NuCube to assess the performance of the heat exchanger and support an optimized design prior to finalization of the detailed design and fabrication to support a demonstration project.

Analysis of NuCycle® Flowsheet for Waste Stream Characterization, Curio Solutions

Curio will partner with Pacific Northwest National Laboratory (PNNL) to conduct an analysis of the NuCycle® flowsheet that will allow the generation of quantities and classification of anticipated waste streams and recommendations on waste forms most suitable to sequestering the generated waste streams. Results of the project would be used to determine the approach to managing waste from a pilot demonstration of NuCycle® to be performed in 2027.

Development of Analytical Techniques for Trace Impurities in 2LiF-BeF2, Kairos Power

Kairos will partner with Pacific Northwest National Laboratory (PNNL) to extend measurements of dissolved oxygen and corrosion products in FLiBe to the full range of relevant/significant impurities, as well as incorporating the measurement methods into their quality assurance program/practices. Refinement of analytical methods for species in salt that impact system operation will enable Kairos to continue along the aggressive timeline for near term nuclear demonstration and commercial deployment.

Independent Verification and Benchmark of Deep Fission’s Deep Borehole Microreactor Thermal Hydraulic System Behavior, Deep Fission

Deep Fission will partner with Idaho National Laboratory (INL) to enhance its thermal hydraulics infrastructure using RELAP5-3D modeling. INL has unique expertise in developing thermomechanical and thermos-hydro-mechanical models in deep geological repositories for used nuclear fuel and geothermal applications involving deep hole drilling and heat extraction.

Independent Assessment of a Novel Heat Exchanger Concept for Open-Air Brayton Cycle, Nano Nuclear Energy

Nano will partner with Idaho National Laboratory (INL) to perform an independent evaluation of the heat exchanger design. This will include the development of a computational model of the heat exchanger to help analyze the design and confirm certain attributes that are critical to the reactor operations.

Development of Oxygen IR Calibration Standards for High-Purity Chloride Salts, Sigma-Aldrich

Idaho National Laboratory (INL) is only one of two labs that can test the oxygen content in chloride salts. MS will partner with INL to verify alignment of test results between MS and INL regarding oxygen content of very high-purity chloride salts utilizing oxygen analyzers, identify, capture, and document best practices into a preliminary framework for a standardized test method and down-select appropriate materials and certification specifications for chloride salt reference standard(s).

Status: In Progress