Voucher Status
The objective of this project was to confirm the design and safety basis of Transatomic Power’s system by determining the thermophysical properties of the fuel salt proposed for use in the system.
Fuel Salt Characterization, Transatomic Power Corp. Read More »
The objective of this project is to quantify the economic advantages of burning spent nuclear fuel (SNF) from light water reactors (LWRs) in a GEM*STAR accelerator-driven subcritical reactor.
Conversion of Light Water Reactor Spent Nuclear Fuel to Fluoride Salt Fuel, Muons, Inc. Read More »
The objective of this project was to convert spent nuclear fuel into molten-chloride-salt fuel and was intended to demonstrate the streamlined development of fuel salt manufacturing from spent nuclear fuel.
The objective of this project was to develop a computational capability for predicting radionuclide release from a broad spectrum of accidents that can be postulated to occur at liquid-metal-cooled reactor (LMR) facilities.
The objective of this project was to develop a simple system that allows control of a plant simulator from a workstation. Called the Task Engine for Job and User Notification (TEJUN, also the Japanese word for “procedure”), the system is a web-based application that allows procedures to be authored in an easy-to-read document format.
Argonne National Laboratory (ANL), Idaho National Laboratory (INL), and Kairos Power, LLC partnered to implement a multiscale thermal-fluids hierarchy analysis methodology for Kairos’ fluoride high-temperature reactor (FHR). The project demonstrated Kairos Power’s design optimization process for the heat exchanger, a vital component of the reactor’s design.
The objective of this project was to determine the design feasibility of Micro Nuclear LLC’s Molten Salt Nuclear Battery (MsNB) by performing computational analysis and discussing the likely multiphysics modeling challenges while coupling thermal hydraulics and neutronics.
Development of the Microscale Nuclear Battery Reactor System, Micro Nuclear LLC Read More »
The objective of this project was to explore the applicability of Power Fluidics™ (PF) to molten salt systems and to determine if PF technology may be able to fulfill some of the forced-flow testing required in support of MSR R&D.
The objective of this project was to focus on the coupling of three high fidelity analysis codes for detailed core analysis, an analysis of the Oklo reactor design to assesses the potential for radionuclide release to the environment during accident scenarios, and an assessment and provision of relevant metal fuel data through inspection of post-irradiation examination data from past metal fuel testing. This project had two additional objectives, the experimental characterization of liquid metal heat pipe performance, failure behavior, and phenomena and the testing of generic heat pipes beyond their design limits, providing original data and insights.
Risk-Informed Mechanistic Source Term Calculations for a Compact Fast Reactor, Oklo Inc. Read More »
The objective of this project was to explore the primary flow stability of the SMR-160 and to investigate an unborated core and primary loop, which necessitates active reactivity control with control rods, and the straight tube, once-through steam generator.
Small Modular Reactor-160 Primary Flow Stability, SMR Inventec LLC Read More »
